Using Your Steam Generator; Steam Ironing - TEFAL PRESSING COMPACT Instructions For Use Manual

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 21
2- PREPARING YOUR STEAM GENERATOR
Fill the boiler :
1. Place your steam generator on a stable, horizontal heat-resistant surface.
2. Ensure that your steam generator is disconnected and cold.
3. Unscrew the boiler cap.
4. Using a water jug, fill with one litre of tap water.
5. Fill the boiler, taking care that the water does not spill over 1 .
If this occurs, remove the excess water.
6. Replace the boiler cap, screwing on tightly.
The water to use in your steam generator :
Your generator has been designed to operate using tap water. However, if your water is very hard,
mix it 50 % tap water 50 % distilled water.
Types of water to be avoided :
Do not use water from clothes dryers, scented or softened water, water from refrigerators, batte-
ries or air conditioners, pure distilled water or rain water ;These contain organic waste or mineral
elements that become concentrated when heated and cause spitting, brown staining or premature
wear to your iron.

3- USING YOUR STEAM GENERATOR

1. Connect your generator to a socket with an earth connection and switch on.
2. Press the On/Off switch (0/1) (depending on the model).The steam indicator turns on and the boiler heats up.
When the indicator goes out (after about 8 minutes) , steam is ready. 2 .
During ironing the iron's thermostat light and the steam indicator will go on and off according to the tempera-
ture control.
BE CAREFUL
• The first time the appliance is used, there may be some fumes and smell but this is not harmful,.
They will not affect use and will disappear rapidly.

4- STEAM IRONING

1. Set the iron's temperature control slide to the type of fabric to be ironed 3 .
2.The thermostat indicator light turns on.
Be careful : the generator and the iron are ready to use when both the iron's thermostat light and the "steam
ready" indicator go out.
3. To obtain steam, press on the steam control button beneath the iron handle and keep it pressed 4 .
The steam will stop when you release the button.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents