Subscribe to Our Youtube Channel
Related Manuals for TEFAL GV6920 PRESSING PROFILE
Summary of Contents for TEFAL GV6920 PRESSING PROFILE
- Page 1 www.tefal.co.uk...
- Page 3 fig.13...
- Page 4 • Never immerse your steam generator in water or any other liquid. Never hold it under the water tap. • The appliance must not be used if it has fallen to the floor, shows evidence of damage, leaks or fails to function correctly.
- Page 5 • Check that your appliance is unplugged and cold. • Unscrew the boiler cap. • Using a water jug, fill with maximum 1 litre of water. Fill the boiler, taking care that the water does not spill over - fig.4. If this occurs, remove the excess water.
-
Page 6: Steam Ironing
• While ironing, the light on top of the iron and the steam ready light turn on and off, designed to withstand high as the temperature adjusts without interrupting ironing. - Page 7 • Slowly unscrew the boiler cap. • Using a water jug, fill with maximum 1 litre of water. • Fill the boiler, taking care that the water does not spill over - fig.4. If this occurs, remove the excess water.
- Page 8 Rinsing the boiler (once a month) • Be careful: To extend the life of your boiler and to avoid the build-up of scale, it is If your water is hard, increase the frequency. essential that you rinse out the boiler at least after every 10 uses (approximately once In particular, do not use a month).
- Page 10 ref.00027943...
Need help?
Do you have a question about the GV6920 PRESSING PROFILE and is the answer not in the manual?
Questions and answers