Haier XF 5C4M1X User Manual
  1. Manuals
  2. Brands
  3. Haier Manuals
  4. Dishwasher
  5. XF 5C4M1X
  6. User manual
Haier XF 5C4M1X User Manual

Haier XF 5C4M1X User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
tung
User manual
EN

Advertisement

Table of Contents
loading

Related Manuals for Haier XF 5C4M1X

Summary of Contents for Haier XF 5C4M1X

  • Page 1 tung User manual...

  • Page 2: Table Of Contents

    Thank you for choosing this product. Contents We are proud to offer the ideal product for you and the best complete range of home 1. GENERAL SAFETY RULES appliances for your daily routine. 2. WATER CONNECTION Carefully read this manual for correct and safe appliance use and for helpful tips on 3.

  • Page 3: General Safety Rules

    1. GENERAL SAFETY sensorial or mental capacities, without experience or knowledge RULES of the product, only if supervised This appliances is intended to  or provided with instruction as be used in household and to the operation of the appliance, similar applications such as: in a safe way with awareness −...
  • Page 4 The manufacturer declines all Water pressure must  between 0.08 MPa and 1 MPa. responsibility for any damage to people or property due to Make sure carpets or rugs do non-earthing of the machine.  not obstruct the base or any of the ventilation openings.
  • Page 5 Do not leave the appliance If you need to move the   exposed to the elements (rain, machine after removing the sun, etc.). packaging, do not try to lift it by the bottom of the door. Open Leaning or sitting on the open ...
  • Page 6 Follow the instructions supplied  with the product. WARNING: Ensure that product, before being switched on for WARNING: the first time, is installed in a horizontal position by way of (only built-in semi- the adjustable feet. integrated models) Check the horizontal position Do not connect the dishwasher using a spirit level to the mains supply until all...

  • Page 7: Water Connection

    2. WATER CONNECTION If the dishwasher is connected to new  The appliance must be connected to pipes or to pipes which have not been the water mains using new hose-sets. inuse for a long time run water through for The old hose-sets should not be a few minutes before connecting the inlet reused.
  • Page 8 AQUASTOP (fig.4):  Hydraulic safety devices A device located on the supply tube that stops water flow if the tube deteriorates; in this case, a red mark will appear in the All the dishwashers are equipped with window "B" and the tube must be an overflow safety device which, if replaced.
  • Page 9 Connecting the outlet hose The outlet hose should disharge into a  The hose can be hooked over the side of  standpipe, making sure that there are no the sink, but it must not be immersed in kinks (fig.5). water, in order to prevent water from being syphoned back to the machine The standpipe must be at least 40 cm...

  • Page 10: Loading The Salt

    3. LOADING THE SALT (Fig. A "1") The appearance of white stains on dishes  is generally a warning sign that the salt container needs filling.  On the bottom of the machine there is a container for the salt for regenerating the softener.

  • Page 11: Adjusting The Upper Basket (Only On Some Models)

    4. ADJUSTING THE UPPER To lift it: lift the basket holding it by the sides, as soon as it is in a raised position, BASKET (ONLY ON SOME let it go without applying any pressure to the MODELS) levers. Type "A": 1.

  • Page 12: Loading Dishes

    5. LOADING DISHES Position the larger plates, slightly inclined  towards the front in order to facilitate the easy insertion of the basket inside the Using the upper basket machine. Cup Holder (only on some models) WARNING: The upper basket (fig. 1) is equipped with movable supports hooked to the side panel.
  • Page 13 "CRYSTAL PROTECT" (only on some models) CRYSTAL PROTECT, a Specific set of accessories for taking care of the most precious and delicate items like crystals, pottery, wine glasses and more: Dedicated double support (left & right) applied on the upper basket, separated from cup holders, designed with a rubber surface for protecting the touching points.
  • Page 14 (fig.10). "CUTLERY SHINE PLUS SYSTEM" (only on some models) You can adjust the height of the cutlery The Haier I-Pro Shine series has a basket handle by pulling or pushing the technologically advanced third basket. handle (fig.11). It is designed with a central water pipe...

  • Page 15: Information For Test Laboratories

    6. INFORMATION FOR connected to 5 special mechanical rotating nozzles that spray water directly on the TEST LABORATORIES cutlery, it also presents an additional spray arm on the part top of the tub. Provides Please information required excellent cutlery washing results. comparison testing and measuring noise levels, according to EN normative, to the following address:...

  • Page 16: Loading The Detergent

    7. LOADING THE DETERGENT (Fig. A "2") The detergent It is essential to use a detergent that is specifically designed for dishwashers If you are using tablets, one should suffice. either in powder, liquid,gel or tablet form. Insert the TABLETS, making sure that they do not interfere with the opening system.
  • Page 17 Loading pre-wash detergent in programmes that require it In programmes that have a pre-wash cycle that requires additional dose detergent (see the washing programmes chapter), the additional detergent must be poured into the appropriate location (C).

  • Page 18: Types Of Detergent

    8. TYPES OF DETERGENT read carefully and follow the manufacturer’s  instructions given on the packaging; Detergent tablets the effectiveness of detergents containing  the built in water softener/salt depends on Detergent tablets of different manufacturers the hardness of your water supply. Check dissolve at different speeds, for this reason, that the hardness of your water supply is during short programmes, some detergent...

  • Page 19: Loading The Rinse Aid

    9. LOADING THE RINSE AID The lid clicks into the locking position.  (Fig. A "3") Always use rinse additives that are suitable for automatic dishwashers. Rinse aid Models equipped with display or rinse aid indicator (only on some Rinse aid, which is automatically released models) during the last rinsing cycle, helps the dishes to dry quickly and prevents spots...
  • Page 20 limestone content water limestone content water considerably affects formation considerably affects formation limescale and the drying performance. limescale and the drying performance. It is therefore important to regulate the It is therefore important to regulate the quantity of rinse aid to achieve good quantity of rinse aid to achieve good washing results.

  • Page 21: Cleaning The Filters

    10. CLEANING THE FILTERS ease cleaning, central  container is removable (fig.3) by pressing (Fig. A "4") the two buttons on the sides and pulling it upwards. The filter system consists of: - A central container that traps the larger particles;...
  • Page 22 Re-assemble the plate and filter unit by  following the previous operations in WARNING reverse order, taking care to screw the After cleaning the filters, make sure that components back correctly, so as not to they are correctly reassembled and jeopardise operation that the gauze filter is properly...

  • Page 23: Practical Hints

    11. PRACTICAL HINTS Achieve the best use of energy, water,  detergent time using recommended maximum load size. Save How to get really good wash up to 50% energy by washing a full load results. instead of 2 half loads. Before placing dishes...
  • Page 24 It is a good idea not to put silver cutlery  Useful hints with non-stainless steel handles into the dishwasher as there could be a chemical In order to avoid any dripping from the top  reaction between them. rack, remove the lower rack first. If the dishes are to be left in the machine ...

  • Page 25: Cleaning And Maintenance

    12. CLEANING AND MAINTENANCE Looking after your appliance correctly can extend its lifespan. Cleaning the appliance’s exterior Disconnect the machine from the power  supply. To clean the dishwasher outside, do not  use solvents (degreasing action) neither 2) Remove the upper rotor arm above the abrasives, but only a cloth soaked with third basket after removing the third water.
  • Page 26 If the machine is not going to be used for some time, it is advisable to follow these rules: 1. do an empty wash with detergent in order to clean the machine of any deposits; 2. pull out the electric plug; 3.

  • Page 27: Description Of The Control

    13. DESCRIPTION OF THE 14. TECHNICAL DATA CONTROL PANEL...

  • Page 28: Programme Selection And Special Features

    15. PROGRAMME SELECTION DISPLAY AND SPECIAL FEATURES The display shows a lot of information on the execution of the programme, the ON/OFF button remaining operating time, the energy and water consumption of each programme and To turn the appliance on and off, press ...
  • Page 29 1. REMAINING TIME DISPLAY Models with dirt sensor (Only on some models). Indicates the washing time for each programme selected and provides the The dishwasher is equipped with a dirt remaining time during washing at the sensor, capable analysing water end of the programme.
  • Page 30 PART LIGHT will indicate Changing a running programme progression of the wash, the bar goes out gradually as the washing is nearing the end. If you want to cancel and change a programme that is already in progress, proceed as follows: 1.
  • Page 31 8. Press the "SELECTION" buttons SETTING button to choose the new language. 9. Press the "CONFIRM" to confirm SETTINGS the setting of the chosen language, The dishwasher comes with certain factory LANGUAGE will be shown on the settings. However, you can adjust the display and a short sound will be heard.
  • Page 32 1. Switch on the dishwasher with the 4. By pressing the "SELECTION" "ON/OFF" button. button, the parameter to be adjusted can be selected. 2. Keep the "SETTINGS" button 5. Select the "DETERGENT TYPE" setting pressed for about 5 sec. When entering on the display.
  • Page 33 4. By pressing the "SELECTION" 2. Keep the "SETTINGS" button button, the parameter to be adjusted pressed for about 5 sec. When entering can be selected. the Menu, a beep will sound and the three SELECT and CONFIRM lights will 5.
  • Page 34 When the door opens, the "AUTO DOOR" message will appear on the display. This option will be automatically active in the "ECO" programme. There is however the option to deactivate it. WARNING: With this option selected, you must not in any way prevent the door from opening or force it to close so as not to damage the mechanism.
  • Page 35 "CHILD LOCK" button Open the door slowly and carefully, to avoid getting wet with splashes of CHILD LOCK ACTIVATION washing water. The dishwasher is equipped with an electronic child lock. Child protection Adding dishes after ADDISH disables commands, thereby preventing indicator light has switched off is unwanted or accidental changes from being strongly discouraged as this could...
  • Page 36 1. Switch the dishwasher on by holding If you press any button (except the  ON/OFF – ENROLMENT Wi-Fi – DELAY down the "ON/OFF" button for about START - START” buttons for 3 seconds, 3 sec. the programme name "P XX NAME" is displayed (P + programme number + 2.
  • Page 37 Interaction with DEMO MODE "NO RINSE AID" warning light In "DEMO MODE" you can use the  dishwasher normal operating conditions, cannot start When the "RINSE AID" message appears programme, only Programmes, on the display or, where present, the Options and Delay Start are active. relative light comes on , fill the tank You can also turn off the dishwasher.

  • Page 38: Remote Control (Wi-Fi)

    "TRY AGAIN" will appear on the product  display. or by the link: The dishwasher will not be connected.  go.haier-europe.com/download-app Repeat the pairing procedure from the  The hOn App is available for devices App. running both Android and iOS, both for tablets and for smartphones.
  • Page 39 Short press the "Wi-Fi" button. The  Press the "ON/OFF" button for 3  "CONNECTING..." display will show secs (or power off). followed by "REMOTE CONTROL ON". If there is a cycle in progress, it will be paused and the appliance will exit REMOTE CONTROL mode.

  • Page 40: Programme Legend

    17. PROGRAMME LEGEND Programme Description A standard and more efficient programme in terms of combined energy and water consumption for normally-soiled dishes. EN60436-standardized programme. Suitable for everyday lightly soiled dishes, your UNIVERSAL daily reference programme. For heavily soiled pans and any other items that INTENSIVE require a strong and effective wash.
  • Page 41 Functions and Options Programme YES* UNIVERSAL YES* ● - INTENSIVE YES* ▲ SMART AI YES* PREWASH YES* ● - 59MIN YES* RAPID 20’ YES* SILENT YES* FLEX ZONE YES* WASH SMART AI ▲ YES*...
  • Page 42 ● = Add detergent for prewash ▲ = "AUTOMATIC" programmes ¹ = only on some models ² = Only if function is activated via SETTINGS. ³ = With cold water (15°C) – Tollerance ±10% With hot water the time remaining until the end of the programme is automatically displayed while the programme is running.

  • Page 43: Water Softener Unit

    18. WATER SOFTENER UNIT Depending on the source of the supply, Regulate the setting of your water softener water contains varying amounts unit according to the degree of hardness of limestone and minerals which are deposited your water, as follows: on the dishes leaving whitish stains and marks.
  • Page 44 For the Eco cycle, it is as shown in the table. WARNING! If you cannot complete the procedure, Level DISPLAY Frequency turn the dishwasher off by pressing the "ON/OFF" button and start the procedure again from the beginning DISPLAY S0 Never (STEP 1).

  • Page 45: Troubleshooting And Warranty

    19. TROUBLESHOOTING AND WARRANTY If you believe the dishwasher is not working correctly, consult the quick guide provided below with some practical tips on how to fix the most common problems. If the malfunction continues or recurs, contact the Technical Assistance Centre. BUG REPORTS Models with a display: errors are reported by a number preceded by the letter "E"...
  • Page 46 Uncontrolled water supply with open solenoid valve. ERROR (with display) with a short Close the water tap immediately and disconnect the appliance from audio signal the power supply. Turn off and unplug the dishwasher, wait a minute. Turn on the Any other code machine and restart a program.
  • Page 47 CAUSE SOLUTION FAULTS Filter is dirty Clean filter Drain pipe is bent Eliminate the bends in the pipe 3. Dishwasher The drain pipe extension is not Follow the instructions for connecting does not correctly connected the drain pipe carefully discharge water The outlet connection on the wall is pointing downwards not Call a qualified technician...
  • Page 48 FAULTS CAUSE SOLUTION Check salt and rinse aid level and 9. Presence of regulate. Should the fault persist, white spots on Mains water is too hard contact the Technical Assistance dishes Centre The dishes knock against one Re-check loading of dishes in the another basket 10.
  • Page 49 Assistance and Warranty The product is guaranteed under the law, and under the terms and conditions stated on the warranty certificate included with the product. The certificate should be stored and shown to an authorized Technical Assistance Centre in case of need, together with the proof of purchase. You can also check the warranty conditions on our website.

  • Page 50: Environmental Conditions

    20. ENVIRONMENTAL CONDITIONS This appliance marked WEEE should treated  cording to the European directive household waste; 2012/19/EUon Waste Electrical Electronic Equipment WEEE should be handed over to the  (WEEE). relevant collection points managed by WEEE contains both polluting substances municipality registered (which can cause negative consequences...
  • Page 52 Haie,...

Table of Contents