Table of Contents
Advertisement
Installing the product
The built-in cooling fan cools both the built-in
1. Slide the oven into the cabinet, align and
cabinet and the front of the product.
secure it while making sure that the power
Cooling fan continues to operate for about
cable is not broken and/or trapped.
20-30 minutes after the oven is switched
off.
Final check
1. Plug in the power cable and switch on the
product's fuse.
2. Check the functions.
Future Transportation
e
Keep the product's original carton and
transport the product in it. Follow the
instructions on the carton. If you do not
have the original carton, pack the product in
bubble wrap or thick cardboard and tape it
ain the oven with 2 screws as illustrated.
|
securely.
For products with cooling fan
e
To prevent the wire grill and tray inside the
Sen
ne nn
|
oven from damaging the oven door, place a
strip of cardboard onto the inside of the
oven door that lines up with the position of
the trays. Tape the oven door to the side
walls.
e
Do not use the door or handle to lift or move
the product.
»
0 not place any objects onto the product
|
and move it in upright position.
Check the general appearance of your
_ gproduct for any damages that might have
occurred during transportation.
1
Cooling fan
2
Control panel
3
Door
14/EN
Advertisement
Table of Contents
