Future Transportation - Beko MSH28B Manual

While performing the wiring, you
must apply with the national/local
electrical regulations and must use
the appropriate socket outlet/line and
plug for oven. In case of the
product's power limits are out of
current carrying capability of plug and
socket outlet/line, the product must
be connected through fixed electrical
installation directly without using plug
and socket outlet/line.
DANGER:
Before starting any work on the elec-
trical installation, disconnect the
product from the mains supply.
There is the risk of electric shock!
Connect the power cable into the socket.
•
Push the product towards the kitchen
wall.
Final check
1. Check electrical functions.
2. Check the Crumb tray position
WARNING
Do not place the crumb tray onto the
heating element.
The correct way to use crumb tray, is
to put it under bottom heating ele-
ments.

Future Transportation

•
Keep the product's original carton and
transport the product in it. Follow the
instructions on the carton. If you do not
have the original carton, pack the
product in bubble wrap or thick card-
board and tape it securely.
•
To prevent the wire grill and tray inside
the oven from damaging the oven door,
place a strip of cardboard onto the in-
side of the oven door that lines up with
the position of the trays. Tape the oven
door to the side walls.
•
Do not use the door or handle to lift or
move the product.
Do not place any objects onto the
product and move it in upright posi-
tion.
Check the general appearance of
your product for any damages that
might have occurred during transpor-
tation.
15/EN