Table of Contents
Advertisement
The first step to regroup the door Is reinstalling
inner glass panel (2).
As illustrated in figure, place the chamfered
corner of the glass panel so that it will rest in the
chamfered corner of the plastic slot.
Inner glass panel (2)
plastic slot close the innermost glass panel (1).
When installing the innermost glass panel (1),
make sure that the printed side of the panel
faces towards the inner glass panel.
It is important to seat lower corner of inner glass
panel into the lower plastic slot.
Push the plastic part towards the frame until you
hear a "click".
Replacing the oven lamp
Before replacing the oven lamp, make
sure that the product is disconnected
from mains and cooled down in order to
avoid the risk of an electrical shock.
Hot surfaces may cause burns!
he oven lamp is a special electric light bulb
ithat can resist up to 300 °C. See Technical
specifications, page 10 for details. Oven
lamps can be obtained from Authorised
service Agents.
sPosition of lamp might vary from the figure.
If your oven is equipped with a round lamp:
1. Disconnect the product from mains.
2. Turn the glass cover counter clockwise to
3. Remove the oven lamp by turning it counter
clockwise and replace it with the new one.
4, Install the glass cover.
27/EN
Advertisement
Table of Contents
