Al Edit Recording - Kenwood MIDI M-85 Instruction Manual

@ Al EDIT recording
When the total playing time of a CD exceeds the recording time of tape, this function allows to accommodate all
tracks in a tape by cutting the end of each track by means of fade out. It is also possible to specify the important
tracks that must not be cut.
1 Set up Deck B ready for recording.
Tape to be recorded
=r
® Insert the cassette tape.
®@ Set the tape
transport direction.
® Select the tape side(s) to
be recorded.
DIRECTION DOLBY NR
) : Select two-side recording.
@® Select the Dolby NR
mode.
DIRECTION OOLBY NR
2 Select the CD input.
3 Insert the disc in the CD player.
Select the tracks which must not be cut in
recording.
® Press the P-MODE key of the CD player.
e lights up.
® Input the track Nos. using the numeric keys.
@ Input several numbers in a desired order.
@ For details, read the instruction manual provided with the CD
player.
Notes:
5 Select the Al EDIT mode with the EDIT MODE
key of the CD player.
i aa
The mode changes every time the key is pressed.
@ Proceed to the next step within 8 seconds after setting Al
EDIT. If 8 seconds have elapsed, select the Al EDIT mode
again.
@ The CD playback mode is set automatically to [PGM].
6 Input the two-way recording time of the tape.
Use the numeric keys of the CD player.
C-60 tape: Press 6 times, and| 20/0 once.
C-46 tape: Press 4 times, and{ 6 Jonce.
@ 46, 54, 60 or 90 can also be selected every time tne[ TIME
key is pressed. In this case, press the| EDIT MODE] key
again to establish the input.
@ Tracks are edited automatically to fit sides A and B, and the
end of editing is indicated when the EDIT indicator changes
from blinking to continuous lighting.
7 Select FADE with the MODE key
of the cassette deck.
8 Press the CCRS key.
Normal-speed recording
Double-speed recording
@ HIGH or NOR. is displayed in the display.
Recording occurs as shown below.
I" Programmed tracks |
ee
@ First, the programmed tracks are recorded without any
cutting, the other tracks are recorded with the end of every
track cut by fade-out.
@ If the tape has enough recording time, all tracks are recorded
until the end.
@ The CD player and cassette deck enter the stop mode auto-
matically after the completion of recording.
1. If an extremely-short tape recording time is set, automatic editing may not occur, or the tracks that must not be cut may cut.
2. The [SPACE] key and | REPEAT] key functions are inoperative.
3. Edit operation does not occur if a track No. 44 or more has been programmed.
M-85/M-959 (En) 3d