Giving Preference To The Tape Length Over The Title Sequence; Time Edit Recording) - Kenwood XD-750 Instruction Manual

XD-750/700/550/550 (En}
Giving preference to the tape length over the title sequence
(time edit recording)
When the tape recording time is specified, recording is ex-
ecuted with changing the title sequence so that no title
will be interrupted when the tape direction is changed at
the end of one side.
%2 4 When equalizer or another effect is applied to the
Fas sound, the sound with the applied effect can be re-
4 aR
corded.
' Recording preparations are 'required. ~[(2H] (Steps to @) (For the reverse mode, select "<>" [twé-way recording).)
Select the "EDIT" mode.
@Confirm that the "PGM" indicator is
not lit.
Hf the "PQM™" indicator is lit, pracs the
P.MODE key to turn it off.
@Press the EDIT key.
corr
The editing is ended when no operation
is executed for 8 sec or more.
B Select the disc.
DISC SKIP
El Foter the recording length of the tape.
a=
» .
man)
ait
unit
even if the disc has already been selected, select the disc again
Press the numeric keys as shown below.
30-minute tape : [+10) [+10) [+10] (0)
46-minute tape: +10) (+10 (3]
elf youcommitan error in the time entry, restart the procedure from step
Up to 32 tracks can be edited
every time the mm key is pressed, the edited track numbers will be
displayed in the changed order. Press the @ key to return to the track
number of the first track.
oe mass » »
om or <a>
cn Pm] Core, CED =
Loy rt pad a 49: 9
» »
: a
pty,
SEF arene BS
Pad
= a5 Y mnwesine
The tape and CD stop automatically when recording has completed.
@ The time display during recording is the remaining time on the current
side of tane.
Depending on the combination of conditions from CD contents (number of titles and length of the titles) and tape recording time, interruption
of a title may not be avoidable. In such a case, the respective title will not be recorded