Operation Of Tuner - Kenwood MIDI M-85 Instruction Manual

Operation of tuner
DIRECT key AUTO key
ENTER key DISPLAY key| | TUNING/CHARACTER key
™@ Receiving broadcast stations and
_ storing them in memory (preset A — —1.
operation)
e=>
B88
i
——
Numeric key, +10 key BAND key
P.SCAN key
1 Display the frequency display. red eac aay
@ Every time the DISPLAY key is pressed, the displayed contents are switched in order of Frequency
— Broadcast station name > Present time > Date (month & day).
2 Select the broadcast band. The bands are switched as follows every time the BAND key is pressed.
(ea AM alae gee
@ The frequency is displayed for a few seconds when a key associated with tuning is pressed.
3 Select the tuning mode.
lights up.
wo
@ Press the key to select the auto (AUTO lighted) or manual (not lighted) mode. Normally, select the auto mode (with AUTO lighted).
4 Tune the desired station. - -
Auto tuning mode Manual tuning mode
TUNING/CHARACTER
DOWN
To decrease To increase Press once. (Tuning Press repeatedly, or press and
frequency frequency stops automatically when | hold, until the desired station is
a station is received.) received.
@ The TUNED indicator lights up when a station is received.
@ Use manual tuning mode when the radio wave is weak and noisy.
With manual tuning, FM broadcasts in stereo are always received in monaural.
5 Store the station in preset memory.
® Press the ENTER key.
*
[MEMORY] lights up for approx. 5 sec.
@ Up to 30 stations can be stored in memory irrespective of broadcast band. Se 9p80-yeS
@ Proceed the steps @ while the MEMORY indicator is lighted.
® Press the numeric key.
Example
[MEMORY] oes Off.
When
preset to preset 3
Z
@ When a station has previously been preset under the numeric key pressed, the newly preset station replaces the previous station.
@ When preset is to be continued, repeat steps 2 to 5.
16 M-s5m-o589 (En)