Troubleshooting - Electrolux GA60SLV222 User Manual

9.2 Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
9.3 External cleaning
Clean the appliance with a moist soft
cloth.

10. TROUBLESHOOTING

The appliance does not start or it stops
during operation.
Before you contact the Service, refer to
the information that follows for a solution
to the problem.
Display
OPEN THE TAP
DRAIN BLOCKED
SERVICE CODE
2. To disassemble the filter (A), pull
apart (A1) and (A2).
3. Remove the filter (B).
A1
4. Wash the filters with water.
5.
Before you put the filter (B) back,
make sure that there are no residues
A2
of food or soil in or around the edge
of the sump.
6.
Make sure that the filter (B) is cor-
rectly positioned under the 2 guides
(C).
7. Assemble the filter (A) and put it back
in filter (B). Turn it clockwise until it
locks.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
With some problems, the display
shows a message and the Time Beam
shows an alarm code.
Time Beam
An incorrect position of the filters
can cause bad washing results
and damage to the appliance.
Problem
The appliance does not fill
with water.
The appliance does not
drain the water.
The anti-flood device is
on.
ENGLISH 67