Wiring Instructions - TEFAL 5203 User Manual

Notice 12L Inox.qxd

Wiring Instructions

WARNING : All appliances must be earthed
n
Important : The wires in this lead are coloured in accordance with the
following codes :
E Green and
yellow or
green
N
Blue or
black
Connect the Green/Yellow wire to
n
the terminal in the plug marked «E»
or by the earth symbol
coloured Green or coloured Green
and Yellow.
Connect the Brown wire to the
n
terminal in the plug marked «L» or
coloured Red.
Connect the Blue wire to the
n
terminal in the plug marked «N» or
coloured Black.
About your factory fitted plug
(for U.K. only - supplied with selected models)
The cord is already fitted with a
n
plug incorporating an appropriate
fuse. If the plug does not fit your
socket outlet, see paragraph below.
Should you need to replace the fuse
in the plug supplied an appro-
priately rated approved BS 1362
fuse must be used (refer to wiring
instructions for fuse rating).
If the plug supplied does not fit
n
your socket outlet, it should be
removed from the mains lead and
disposed of safely. The flexible cord
insulation should be stripped back
Customer relations helpline
If you need any help or advice,
n
please call our customer relation's
team on :
- 0845 60214 54 (for UK)
- (1) 677 41 76 (for Ireland)
12/11/2001 14:46 Page 9
(for U.K. only)
Green and Yellow : Earth
L Brown
Brown : Live
or
Red
Blue : Neutral
Fit correct fuse
Use cable gripper
A 13 amp fuse should be fitted
n
when the appliance is connected to
or a BS 1363A plug.
Seek professional advice if you are
n
unsure of the correct procedure for
the above.
as appropriate and a suitable
alternative plug
replacement
equipped with an appropriate fuse.
If the plug has external access to
n
the fuse (non-rewirable type plug)
please note that the fuse cover is an
important part of the plug. Please
ensure that it is always refitted
correctly. If you lose this cover
please do not use the plug. You
may contact Tefal UK Limited for a
replacement.
fitted. The
plug must be