Main Unit - Sharp GX-CD555Z Service Manual

Follow the below-mentioned notes when disassembling the
unit and reassembling it, to keep its safety and excellent
performance:
2. Be sure to remove the power supply plug from the wall
outlet before starting to disassemble the unit and remove
the batteries from the unit.
3. Take off nylon bands or wire holders where they need be
removed when disassembling the unit. After servicing the
unit, be sure to rearrange the leads where they were before
disassembling.
4. Take suff icient care on static electricity of integrated circuits
and other circuits when servicing.
REMOVAL

MAIN UNIT

2
Top Cabinet
2. Tip.. ....................... (B2)xl
3. Socket I
3 Main PWB
(with Tuner Frame) 2. Knob .................... (C2)xl
3. Spring .................. (C3)xl
4. Socket.. ................ (C4)x4
5. Flat Wire.. ............ (C5)xl
4
Tape Mechanism
2. Screw................... (Dl)xl
3. Washer.. .............. (D2)xl
4. Lever.. .................. (D3)xl
5. Screw.. ................. (D4)x7
5
Volume PWB
2. Nut.. ...................... (E2)xl
3. Washer ................. (E3)xl
7 / L C D P W B
DISASSEMBLY
PROCEDURE
1. Screw.. .................. (Bl)x4
Flat Wire.. ............. (B3)x2
1. Screw.. ................. (Cl)x2
1. Open the cassette Holder
1. Knob ..................... (El)xl
Screw . . . . . . . . . . . . . . . . . . .
5-3
5-l ,3
5-l
5-3
6-l
6-2
6-3
6-3
6-3
Volume
PWB
Cabinet
CD Servo
PWB