Programmes; Washing; Switching Off - Smeg WML148 Instruction Manual

Before washing for the first time
Run a wash cycle without any laundry
Sorting and loading the laundry
Follow the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature.
Do not exceed the maximum load
Observe the important information
Insert items of laundry of varying sizes.
Close the washing machine door. Take care not to trap items of laundry
between the washing machine door and the rubber seal.
Adding detergent and care products
Amount of laundry, level of soiling, water hardness (ask your water supply
company) and manufacturer's instructions.
Models without insert for liquid detergent:
our liquid detergent into the appropriate dispenser and place in the drum.
During operation: Open the detergent drawer with care.
Dilute thick fabric softener and care products with water.
This prevents blockages.
Set and adjust the programme
Additional Start/
functions Pause
end after
Status indicators:
sing, spinning,end of programme
p = no final spin) reached
page 9
page 7.
page 9.
Measure accordingly:
1
Additional functions, the option
button and spin speed
Individual settings, page 5.
2
Select
START/STOP
(Start/Pause)
Programme selector for
switching the machine on and
off and for selecting the
programme. Can be turned in
either direction.
All buttons are sensitive and
need only to be touched lightly.
If you press and hold the
(Finished in) option button
for too long, the appliance
automatically cycles through
the setting options.

Washing

Detergent drawer
with compartments I, II,
Washing machine door
Control panel
Washing machine
door handle
Service flap
Washing
3

Switching off

Turn the programme selector to
Turning the tap off
Not required for AquaStop models
instructions, page 7.
Removing the laundry
Open the washing machine door and remove the laundry.
If (Rinse Stop = without final spin) is active:
Turn the programme selector to
spin speed. Select START/STOP (Start/Pause).
– Remove any foreign objects - risk of rusting.
– Leave the washing machine door and detergent
drawer open so that any residual water can dry
away.
End of programme when ...
...START/STOP (Start/Pause) flashes.
Cancel the programme
Programmes at high temperatures:
– Cool laundry: Select Rapid 15'.
– Select START/STOP (Start/Pause).
3
Programmes at lower temperatures:
– Select (Spin) or (Empty).
– Select START/STOP (Start/Pause).
* programme, page 1
Change the programme, if...
... you have selected the wrong programme by mistake:
– Reselect the programme.
– Select START/STOP (Start/Pause). The new
programme starts from the beginning.
Cancel programme
– Select START/STOP (Start/Pause). –
panel.
– if required, add laundry (do not leave the washing
machine door open for too long as water from the
laundry could leak out).
– Select START/STOP (Start/Pause).
Off.
Installation
(Empty) or select the
– in the display
4