Advertisement
Quick Links
Advertisement
Related Manuals for jbc HTS
Summary of Contents for jbc HTS
- Page 1 INSTRUCTION MANUAL Stand for HT420 Thermal Tweezers...
-
Page 2: Packing List
This manual corresponds to the following reference: HT-SF Packing List The following items are included: Stand for HT420 Thermal Tweezers ....................1 unit Sponge for Stand 48 x 26.5 mm ..1 unit Ref. S7034 Stand Cable 1m .... 1 unit Brass Wool .... -
Page 3: Features And Connections
para manuales - color gris 200 mm Features and Connections 130 mm 130 mm CC1001 100 mm Cartridge Storage Cable Collector Quick Tip Changer 80 mm H6269 Tool Holder 60 mm CL6210 Brass Wool (inside) 50 mm 40 mm CL7889 S7034 Wiper Sponge... - Page 4 Assembly Adjustable Cable Collector (CC1001) The cable collector is flexible. It accompanies and adapts to the Insert the cable into the cable movements during the soldering collector clip. Do not leave the process. cable longer than necessary to reach the work area freely. Adjustable Tool Holder (H6269) Wiper (CL7889) DTS (HT470)
- Page 5 para manuales - color gris 200 mm Quick Tip Changer 130 mm 130 mm For a safe cartridge exchange, unplug the tool or turn the station off. 1. Unlocking 2. Removing 100 mm srews 80 mm 60 mm Unlock the cartidge fixing screws. Place the cartridges in the two outer grooves and pull the tweezers to remove the cartridges from the tool.
- Page 6 Tweezers Positioning Vertical Positioning HTS (h The tweezers position in the stand is shown in the image (1). Note: When using the customized cartridges like ref. C420283 or ref. C420286, place the tweezers vertically, as shown in the image (2).
- Page 7 para manuales - color gris 200 mm Wiper and Brass Wool Replacement 130 mm 130 mm The wiper and brass wool can easily be removed for cleaning or replacement when they are worn. 100 mm 80 mm 60 mm Lift the wiper at its front edge. Remove the wiper by pulling Replace the brass wool with a it out.
-
Page 8: Maintenance
- Periodically check all cables and tube connections. - Replace any defective or damaged parts. Use original JBC spare parts only. - Repairs should only be performed by a JBC authorized technical service. - Page 9 para manuales - color gris 200 mm Safety 130 mm 130 mm It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. 100 mm - Do not use the units for any purpose other than soldering or rework. Incorrect use may cause a fire. - The power cord must be plugged into approved bases.
- Page 10 Notes...
- Page 11 para manuales - color gris 200 mm Notes 130 mm 130 mm 100 mm 80 mm 60 mm 50 mm 40 mm...
-
Page 12: Specifications
13.46 x 6.10 x 4.72 in / 4.63 lb Complies with CE standards ESD safe Warranty JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse.