Start/Pause Button; Function Buttons - Smeg SWM86 User Manual

START/PAUSE BUTTON

This button is used for starting a selected programme or putting a
programme in progress on pause.
FUNCTION INDICATOR LAMPS
Pressing the start/hold button or any other function button
switches on the lamps found above the buttons and the control
panel, which indicate the wash stages of programmes. When any
one of these lamps is on it means that certain programme is in
use. The lamp is off when any function button or the start/hold
button is pressed, or the selected function has finished its
operation.
The function indicator lamps are also used for failure codes
specified in Section 9.

FUNCTION BUTTONS

No spin
This program is recommended to be used for your sensitive
clothes on which no spinning should be done. By pressing this
function button, you can cancel the spinning process which is
included in the program.
8