Start/Pause Button; Function Buttons - Smeg SWM840 User Manual

START/PAUSE BUTTON

This button is used for starting a selected programme or putting a
programme in progress on pause.
FUNCTION INDICATOR LAMPS
Pressing the start/hold button or any other function button
switches on the lamps found above the buttons and the control
panel, which indicate the wash stages of programmes. When any
one of these lamps is on it means that certain programme is in
use. The lamp is off when any function button or the start/hold
button is pressed, or the selected function has finished its
operation.
The function indicator lamps are also used for failure codes
specified in Section 9.

FUNCTION BUTTONS

Rinse hold
This function is recommended to be used when the clothes cannot
be taken immediately after the end of the program.This will
prevent occurrence of wrinkles. When this button is pressed, the
last rinsing water is not drained. For the program to continue from
the start pause, repress the start pause button.
8