Start/Pause Button; Function Indicator Lights; Function Buttons - Smeg SWM65E Manual

START/PAUSE BUTTON

Used to start a selected program or pause during running.
WARNING!
It is required for the program knob to be brought to O(off)
position before selecting the program or changing a continuing
program.

FUNCTION INDICATOR LIGHTS

When the start/pause button or any function button is pressed,the
corresponding light turns on.The light turns off when the function
button or start/pause button is re-pressed, or when the process
the selected function is completed.
The function indicator lights are also used in failure detection system
mentioned in section 9.

FUNCTION BUTTONS

No spin
This program is recommended to be used for your sensitive
clothes on which no spinning should be done. By pressing this
function button, you can cancel the spinning process which is
included in the program.
Prewash
With this function you can start an additional wash operation
for heavily soiled laundry. When you use this function you
must put detergent into the prewash compartment of the
detergent drawer. If the additional function features of your
machine contain this option and you will wash your laundry in
a prewash programme, the lamp above the function button
will automatically light up. Even if you press the function
button to cancel this feature it will not be cancelled at a wash
function with a prewash operation.
35