Table of Contents
Advertisement
FORWARD (FWD) AND REVERSE (REV) BUTTONS
Set the automatic timer on MANUAL and then momen-
tarily depress the forward button
,
to advance the slide
tray,
or the reverse button
,
to reverse the slide
tray.
Hold-
ing either button depressed will advance or reverse the
slide tray for scanning
.
REMOTE CONTROL
A remote control having both a ro cking-type lever for
advancing or reversing the slide tray and a rocking-type
wheel for power-focusing the lens, is furnished with the
projector.
Plug the remote
control into
the remote -con
-
trol socket at the back of the projector
.
The smal
l
dot
on the plug should be upward when the plug is engaged
in the
socket.
Depress the LOW or HIGH button to turn on
the projection lamp
.
Set the automatic timer to MANUAL.
Momentarily depress the front or back of the rocking-
type lever to change the sl ides (in a forward or reverse
direction
,
respectively) at any desired time-interval.
NOTE
:
The fully automatic operation can be interrupted
at any time by use of the forward or reverse button
,
or
the remote control. Momentarily rotatin
g
the rocking-type
wheel forward or backward causes the projection lens to
focus forward or backward respectively
.
11
Advertisement
Table of Contents
