Do you have a question about the CAROUSEL 850H and is the answer not in the manual?
Questions and answers
Anita
June 21, 2025
The Foward and reverse buttons are not advancing the slides. The projector is old and hasn’t been used in awhile. Are there any batteries to replace?
1 comments:
Mr. Anderson
August 21, 2025
If the forward and reverse buttons are not advancing slides on a Kodak CAROUSEL 850H projector, possible issues include:
1. The buttons are not being pressed firmly enough (especially the reverse button, which must be pressed firmly). 2. There could be a mechanical or electrical fault in the button mechanism or slide tray.
There is no mention of batteries required for the projector or the remote control, so battery replacement is not necessary.
This answer is automatically generated
Jeff Kuntz
April 20, 2025
When the unit is turned on, the tray keeps advancing forward. Unable to stop it. Is there an adjustment and lubrication point?
1 comments:
Mr. Anderson
May 10, 2025
To stop the tray from continuously advancing on the Kodak CAROUSEL 850H, ensure you press the reverse button on the remote control firmly. If you do not press it firmly, the tray may rotate forward instead of reversing.
There is no mention of adjustment or lubrication points in the provided information.
Need help?
Do you have a question about the CAROUSEL 850H and is the answer not in the manual?
Questions and answers
The Foward and reverse buttons are not advancing the slides. The projector is old and hasn’t been used in awhile. Are there any batteries to replace?
If the forward and reverse buttons are not advancing slides on a Kodak CAROUSEL 850H projector, possible issues include:
1. The buttons are not being pressed firmly enough (especially the reverse button, which must be pressed firmly).
2. There could be a mechanical or electrical fault in the button mechanism or slide tray.
There is no mention of batteries required for the projector or the remote control, so battery replacement is not necessary.
This answer is automatically generated
When the unit is turned on, the tray keeps advancing forward. Unable to stop it. Is there an adjustment and lubrication point?
To stop the tray from continuously advancing on the Kodak CAROUSEL 850H, ensure you press the reverse button on the remote control firmly. If you do not press it firmly, the tray may rotate forward instead of reversing.
There is no mention of adjustment or lubrication points in the provided information.
This answer is automatically generated