Table of Contents
Advertisement
Playing and recording of musical sequences (Sequencer)
3. arrange the songs within the list (or confirm the previous programming). To move a piece into a different
position, locate the cursor on the relative field of the file with the [ ] and [ ] buttons and use [+] to move the
position forward or [-] to set an earlier position.
4. press [MENU/ENTER] to save the list or [EXIT] to return to the previous video page.
5. as for MIDI files, the first three characters can only be numbers. To enter the name, use [ ] and [ ] buttons
to move the cursor and [+] and [-] to select the character.
6. press [MENU/ENTER] to confirm the name and proceed to save, or [EXIT] to return to the previous video
page. The "FILE SAVED" message confirms that the LIST has been saved. If [EXIT] is pressed while in the
save screen, the system warns that the new list is about to be lost with the message "DISCARD SONG LIST?"
and that [MENU/ENTER] must be pressed to confirm that you wish to quit and delete the data acquired, or
[EXIT] to return to the save screen.
NOTE
If you wish to rename .LST files saved to the USB flash drive using a computer, always make sure that the
names names can be a maximum of 12 characters (including those before the "_") and cannot contain special
characters such as "_", "@", "#", etc.In add of this please pay attention to do not delete the first three
characters and the "_".
Play options of the sequencer (PLAY OPTIONS menu)
Select the PLAY OPTIONS field to access the menu offering the following options:
Function
Description
Transposer
Setting a semitone transposition on the songs played by the sequencer.
Select ON to automatically loop any song.
Song Loop
Select ON to automatically play the next song when the previous is over, without pressing the
List Autoplay
[
List Loop
Select ON to automatically loop a song list.
Deleting songs or song lists (DELETE function)
When you want to delete one or more songs or song lists from the current memory
unit, select the DELETE function in the SEQUENCER menu.
Now use the [ ] and [ ] buttons to move the cursor, [+] to select the .MID or .LST
file you want to delete, [-] to deselect it. You can select several files, selecting the
ALL SONGS option allow you to select all .MID files stored in the current memory
unit, ALL LISTS selects all .LST files.
Press [MENU/ENTER] to confirm the operation or [EXIT] to quit, the display will
show a request to confirm deletion. Also in this case, press [MENU/ENTER] to
confirm or [EXIT] to quit.
Copying songs or song lists (COPY function)
When you want to copy one or more songs or song lists from a memory unit to
another, select the COPY function in the SEQUENCER menu.
The first step is to select the source and destination memory units. To do this
press [MENU/ENTER] to change the displayed setting and then [EXIT] to proceed
with the files selection.
In the next video page use the [ ] and [ ] buttons to move the cursor, [+] to
select the .MID or .LST file you want to copy, [-] to deselect it. You can select
several files, selecting the ALL SONGS option allow you to select all .MID files
stored in the source memory unit, ALL LISTS selects all .LST files. In addition to
this, to the left of the file name can be displayed the symbol, informing that a file
with the same name and extension is already present in the destination memory
unit. Selecting this file the symbol changes in
destination memory unit will be overwritten.
Press [MENU/ENTER] to confirm the selection or [EXIT] to quit. A message
informing how many files will be copied and/or overwitten will be displayed, press
[MENU/ENTER] again to confirm the copy or [EXIT] to quit.
Cantorum Trio – Duo Plus
] button. Only works with song lists.
Reference Manual
, warning that the file in the
EN - 44
Advertisement
Table of Contents
