Table of Contents
Advertisement
COMBINATIONS SETTINGS (SETUP / COMBINATIONS menu)
The COMBINATIONS menu contains all the settings relating to the combinations
available in the organ.
To access to this menu, in the main video page,
1. press the [MENU/ENTER] button,
2. place the cursor on the SETUP field and press [MENU/ENTER],
3. place the cursor on the COMBINATIONS field and press [MENU/ENTER].
The COMBINATIONS menu contains the following settings:
Parameter name
Description
Couplers in
Enable/disable of storing the status of couplers in the Crescendo.
Crescendo
Settings: Yes, No
Tremulant
Enable/disable of storing the tremulant parameters (see page 17) in the general and divisional
parameters in
combinations.
Combinations
Settings: No, Yes
ENC in
Enable/disable of storing the status of [ENC] thumb piston in the general combinations.
Combinations
Settings: No, Yes
ENC affected by
Enable/disable to switch off [ENC] thumb piston by [C] thumb piston.
Cancel
Settings: No, Yes
A.P. in
Enable/disable of storing the status of [AUTO PED] thumb piston in the general combinations.
Combinations
Settings: No, Yes
A.P. affected by
Enable/disable to switch off [AUTO PED] thumb piston by [C] thumb piston.
Cancel
Settings: No, Yes
Orchestra Params in
Enable/disable of storing the configuration parameters of orchestral voices in the combinations.
Combinations
Settings: No, Yes
NOTE
This setting affects the parameters that can be adjusted with the function described on page
and not with the settings that are stored in the Pipe Sets.
TUTTI Mode
Selecting how [TUTTI] combination controls stops.
Settings:
• Gen. Combination: replaces its content.
• Layered: adds its content.
Combinations settings (Setup / Combinations menu)
Cantorum Trio – Duo Plus
EN - 27
22
Reference Manual
Advertisement
Table of Contents
