Setting The Internal Amp Equalizer (Int. Amp Equalizer Function); Regulating The Volume Of The Prog. Out Outputs (Ext. Out Volumes Function); Routing Of The Audio Input To The Prog. Out Outputs (Input To Output Function) - Viscount Cantorum Trio Plus Reference Manual

Setting the internal amp equalizer (INT. AMP EQUALIZER function)

The INTERNAL AMPLIFICATION EQUALIZER function adjusts the five-band
equalizer of the internal amplification and therefore the sound from the speakers
of the organ (not that from the external speakers, which can be adjusted by
dedicated equalizers for each PROG. OUT output, available in the "Physis Plus
The Editor" application).
To access the adjustment screen, select the INT. AMP EQUALIZER field in the
AUDIO menu.
In the lower part of the screen there are the five central band frequencies of the
band-pass filters. To move the cursor from one band to the other, use the buttons [ ] and [ ].
The top of the screen shows the increase or decrease of the signal of the selected band. Each band can be
modified from +8 dB (maximum signal gain) to -8 dB (maximum signal dampening). To regulate this use [+] and
[-] buttons.
The following graph shows how the equalizer works.
Gain
+8 dB
+7 dB
+6 dB
+5 dB
+4 dB
+3 dB
+2 dB
+1 dB
0 dB
-1 dB
-2 dB
-3 dB
-4 dB
-5 dB
-6 dB
-7 dB
-8 dB
20 Hz

Regulating the volume of the PROG. OUT outputs (EXT. OUT VOLUMES function)

The external sound configuration can be customized further by regulating the
volume of each PROG. OUT rear outputs.
To access the adjustment screen, select the EXT. OUT VOLUMES field in the
AUDIO menu.
In the lower part of the screen there are the number of the output. To move the
cursor from one output to the other, use the buttons [ ] and [ ].
The top of the screen shows the signal level of the selected output. Each volume
can be modified from -18 dB to +6 dB. To regulate this use [+] and [-] buttons.
Routing of the audio input to the PROG. OUT outputs
(INPUT TO OUTPUT function)
This function allows to set the routing of the input signals present in the INPUT
connector to the PROG. OUT outputs of the rear panel.
To access the adjustment screen, select the INPUT TO OUTPUT field in the
AUDIO menu.
The settings which can be made are:
Parameter name
Left
Right
100 Hz 320 Hz
Description
PROG. OUT output where the left input signal is routed.
Settings: [output number]
PROG. OUT output where the right input signal is routed.
Settings: [output number]
EN - 29
Audio settings (Setup / Audio menu)
1 KHz 3.2 KHz 10 KHz
Cantorum Trio – Duo Plus
Freq
20 KHz
Reference Manual