Led Definition; Safety Instructions - Edimax EW-7489WAX Quick Installation Manual

LED definition

Description (For Alpha/Beta/Charlie/Delta)
AP is off or reboot started
Normal Operation
AP is booting & connecting to wireless controller
Error, no wireless controller found. AP will
reboot (if not yet claimed by a controller). Check
network connection if error persists.
If reset button pressed: AP preparing configuration rese
Configuration reset in progress *
Firmware update in progress*
Note: Do not disconnect from power
AP has no connection to the wireless controller
AP is not claimed by wireless controller

Safety Instructions

You can operate the access point (AP) safely if you follow the information in these Safety Instructions
and on the appliance.
Do not reach into the appliance. There are dangerous circuits inside the appliance that can cause death
if you touch them.
Damaged appliances must be returned. It is forbidden to open the hardware appliance or to change its
components. Failure to comply with this rule results in the loss of warranty cover from EDIMAX.
Connect the device to a power socket with a fully functional earth conductor. Defective earth
conductor connections do not comply with the requirements for safety and electromagnetic
compatibility. Check the power socket before connecting the hardware appliance.
The socket-outlet shall be installed near the equipment and shall be easily accessible.
Before you switch on the appliance make sure that your mains voltage complies with the supply
voltage of the appliance. The connection data are shown on the name plate.
To disconnect the appliance completely take the power cable from the power socket. Make sure that
the power plug is freely accessible.
Make sure that no one can trip over the power cable and that it cannot be damaged by objects.
Only connect system peripherals complying with the requirements for protective extra-low voltage
according to EN/IEC 62368-1.
Only use parts and accessories validated by EDIMAX. Using non-approved parts and accessories may
affect the functioning of the appliance and your safety.
LED
Off
Solid Green
Flashing
Green
Solid Red
Flashing Slow
Red
Flashing Fast
Red
Solid Amber
Flashing
Amber