Control Lock; Power Management - Smeg SI3842B Manual

Instructions for the user

5.13 Control lock

The control lock is a device that protects the appliance from accidental or inappropriate use.
This function cannot be enabled if the cooking zones are active.
5.13.1Activating the control lock
After having switched on the hob (see "5.3 Switching on and off the hob"), press keys and at
the same time. After the buzzer has sounded press key .
The controls are now locked and will appear on the display.
In case of a power failure the control lock will be disabled.
5.13.2Deactivating the control lock
Press keys and at the same time. After the buzzer has sounded press key .

5.14 Power management

To optimise energy consumption, the groups made up of two
hot plates (see figure below) are prevented from supplying
more than a determined maximum operating power. If the
value set for the two hot plates exceeds the permitted power,
the electronic circuit board will automatically maintain the
maximum level permitted modifying the power supplied by the
hot plates. The power level selected by the electronic circuit
board will always be visible on the display.
Priority is given to the last zone set.
41