Table of Contents
Advertisement
INTRODUCTION
E Handling Precautions
Power Supply
e Make sure to use only the YAMAHA power adapter PA-W10.
€ In case of electrical storm probability, unplug the power cord from the electrical socket in advance.
€ 1f you will not use the AVS-10 for a long period of time, unplug the power adapter from the electrical outlet.
Power Cord
€ Be careful not to touch the power plug with wet hands; you may receive an electric shock.
€ To prevent damage апа short-circuiting of the cord wires, always hold the plug when unplugging the cord and never
pull on the cord.
Connection
• Before connecting the AVS-10, make sure that the POWER switch of the Electone is turned OFF.
€ Before transporting the AVS-10, make sure to disconnect its power cord and MIDI cables.
Handling
€ Never remodel the AVS-10 nor disassemble its parts yourself. Such actions can cause serious damage to the AVS-10.
e Never subject the buttons and switches to unnecessary force.
€ 'To prevent damage and short-circuiting of the cord wires, always hold the plug when unplugging the cord and never
pull on the cord.
ФЇ? water accidentally enters the AVS-10, immediately turn OFF the POWER switch, unplug the power cord, and
contact the Yamaha Music Dealer where you purchased this unit.
|
Choosing an Installation Site
@ Avoid places exposed to direct sunlight.
€ Avoid places exposed to excgessive moisture, dust, and excessively low temperatures.
Cleaning the Outer Case
|
@Clean the outer case by wiping it with a soft, dry cloth.
€ Never use thinner, benzine, chemically harsh solvents nor chemically-treated cloths.
ФІ the case is particularly dirty, moisten a soft, clean cloth in a mild detergent diluted with water, wring the cloth out
well, then wipe off the soiled areas. Next, wipe the unit again with a dry cloth.
If the AVS-10 Operates Abnormally
elf the AVS-10 produces an abnormal odor or smoke, immediately unplug the power cord and contact the Yamaha
Music Dealer where you purchased this unit.
Advertisement
Table of Contents
