Table of Contents
Advertisement
MIDI CONTROL
Changing the MIDI Receive Channel Nos.
i
Although this operation is usually not required, it can be useful when you wish, for example, to provide an AVS-10
sound with greater richness, to sound a PEDALS voice from the upper (or lower) keyboard, and so on.
Let's assume that you have set the MIDI Receive Channel Nos. to
LC.
i
"1" for the upper keyboard, "2" for the lower keyboard, and "2" for
the pedal keyboard. Now, when you play the upper keyboard, the
і
:
"UPPER VOICE" will be sounded; and when you play the lower
L
C.
д
keyboard, both the "LOWER VOICE" and "PEDALS VOICE" will
be sounded. This method can be used when you wish to combine the
bass notes with the part you perform using the left hand.
D C "
Р
К
Gated esd Aaah
ee
ee
en
ert RR
1. Press
the
У
button
while
you
hold down
the
The MIDI Receive Channels for the
REGIST. button.
upper, lower, and pedal keyboards are
pre-assigned with the numbers below:
/
€1- Received by the upper keyboard.
сни
/
•2 = Received by the lower keyboard.
REGIST.
/
ëppes
/
@3 = Received by the pedal keyboard.
The menu below will be displayed.
—— VOLUME
/ DATA —
£
Д Р Е
i
2. Press the U/L/P button to position the cursor at
the keyboard for which you wish to change the
Channel No.
—— VOLUME
/ DATA ——
Uc: Channel No. of the upper keyboard.
Le: Channel No. of the lower keyboard.
Ре: Channel No. of the pedal keyboard.
U/L/P
16
Advertisement
Table of Contents
