Transport; Storage - Kärcher RCV 5 Manual

5. Push the water reservoir horizontally
into the cleaning robot until it audibly
engages.
6. Press the On / Off button.
The cleaning process continues.
Emptying the dust container
1. Press any key.
The cleaning robot stops.
2. Remove the dust container, see
chapter Removing the dust contain-
er.
3. Empty the dust container.
a Open the filter flap.
b Remove the filter flap.
c Empty the dust container.
18
d Insert the filter flap.
e Close the filter flap.
4. Install the dust container, see chap-
ter Installing the dust container.
5. Press the On / Off button.
The cleaning process continues.
Cleaning the wiper cloth
The wiper cloth can be cleaned during
a cleaning process.
1. Press any key.
The cleaning robot stops.
2. Remove the wiper cloth, see chapter
Removing the wiper cloth.
3. Clean the wiper cloth.
4. Install the wiper cloth, see chapter
Installing the wiper cloth.
5. Press the On / Off button.
The cleaning process continues.
If possible, only transport or return the
device in its original packaging. If the
original packaging is not available,
please contact our service.
Safety instructions for transport
The lithium-ion battery is subject to the
requirements of dangerous goods reg-
ulations.
An undamaged and functional battery
can be transported by the user in pub-
lic traffic areas without any further re-
quirements.
When shipping via third parties (trans-
port companies), observe the special
requirements for packaging and label-
ing.
Observe the national regulations.
ATTENTION
Damage to the cleaning robot due to
incorrect storage
Do not store the cleaning robot upside
down. The housing of the laser radar
English

Transport

Storage