Kärcher Extra RM 752 ASF Quick Start

QUICKSTART
Intensive deep cleaner Extra RM 752 ASF
Removal of care films
Preparation
1
A
Removing the care film
2
A
Removing residues
3
A
WARNING
These are only brief instructions! Please read the product information and observe the safety information on the
product label prior to using the detergent. Follow the dosing instructions on the product label.
The non-compliance with the safety information can cause damage to the object to be cleaned and risks
for the environment, the user and other persons.
B
B
B
C
C
C
A Determine coating (e.g. paper clip test).
Use the intensive deep cleaner on coatings
insensitive to alkali (e.g. PVC / PUR) only.
B Select and prepare the machine and acces-
sory that is suitable for the floor covering.
C Dose the deep cleaner according to the thick-
ness of the care film to be removed
(approx. 20-30%, max. 50%).
A Apply deep cleaner solution, do not
vacuum off.
B Allow deep cleaner solution to react
according to the thickness of the care film
to be removed (approx. 5-10 minutes).
C Mechanically treat the floor covering after
the reaction time, then vacuum off the dirt.
A Thoroughly post-clean the floor covering
with clear water until all detergent and dirt
residues are removed.
B Check pH-value. Repeat the post-cleaning
until a pH-value of 7-8.5 is reached.
C Prior to a new coating, the floor covering must
be dry and free of dust.
CAUTION
Risk of damage due to detergent! Carefully clean
accessories, work materials and machines after
working.
5.965-278.0 01/14