Page 1
OM-ER2SSZ-CEE-01 Electric Chain Hoist ER2 – High Function Series Dual Speed Inverter (VFD) [125 kg to 5 t] Step-less Switch Owner’s Manual (Supplement)
Page 2
Speed ratio: 6:1 (Maximum speed 6 times higher than minimum speed) Push button switch protection code: IP55 Ambient temperature: -20°C to 40°C Ambient humidity: 85%RH (no condensation) * For the operational environment conditions of the product, see “KITO ER2 Series Electric Chain Hoist (125 kg to 5 t), Owner’s Manual”.
Page 3
Failure to comply with this instruction causes bodily injury or loss of property. Maintenance Carry out frequent and periodic inspections based on the following inspection list. For inspection of other than this product, see “ER2 Series Electric Chain Hoist (125 kg to 5 t), Parts List” (separately provided). Step-less Switch Inspection List...
Page 4
Z3CRX01 10C complete set speed 5 push button switch ← ← ← ← 1801 SWDB420AC MVD assembly For information on standard ER2 electric chain hoist parts, refer to “ER2 Series Electric Chain Hoist (125kg to 5t) Parts List (separate document).
Need help?
Do you have a question about the ER2 Series and is the answer not in the manual?
Questions and answers