Troubleshooting - Whirlpool AMW 439/NB Owner's Manual

CLEANING
Make sure that the appliance has cooled down before
carrying out any maintenance or cleaning.
INTERIOR AND EXTERIOR SURFACES
• Clean the surfaces with a damp microfibre cloth.
If they are very dirty, add a few drops of pH-neutral
detergent. Finish off with a dry cloth.
• Clean the glass in the door with a suitable liquid
detergent.
• At regular intervals, or in case of spills, remove the
turntable and its support to clean the bottom of the
oven, removing all food residue.
• The grill does not need to be cleaned as the intense
heat burns away any dirt. Use this function on a regular
basis.

TROUBLESHOOTING

Problem
The oven is not working.
The display is showing "Err".
Policies, standard documentation and additional product information can be found by:
• Using the QR code in your appliance
docs . whirlpool . eu
• Visiting our website
contact our After-sales Service
• Alternatively,
sales Service, please state the codes provided on your product's identification plate.
4
Possible cause
Power cut.
Disconnection from the mains.
Software fault.
(See phone number in the warranty booklet). When contacting our After-
Never use steam cleaning equipment.
Do not use wire wool, abrasive scourers or abrasive/
corrosive cleaning agents, as these could damage the
surfaces of the appliance.
ACCESSORIES
All accessories are dishwasher safe with the exception
of the crisp plate. The crisp plate should be cleaned
using water and a mild detergent. For stubborn dirt, rub
gently with a cloth. Always leave the crisp plate to cool
down before cleaning.
Solution
Check for the presence of mains electrical power and
whether the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
Contact you nearest After-sales Service Centre and state
the letter or number that follows "Err".
400011688758