Troubleshooting Guide; After Sales Service; Declaration Of Conformity Ce - Whirlpool 6AKZ 167 Manual

Table of Contents

Advertisement

54283agb.fm5 Page 11 Tuesday, March 15, 2005 1:16 PM
Oven not working
Switch the oven off and then on again to see if
the problem persists.
Check for the presence of mains electrical
power.
Check that the oven selector is not on position
"0".
Before contacting After Sales Service:
1. Try to solve the problem
(see "Troubleshooting guide").
2. Turn off the appliance and restart it to see if the
fault is repeated.
If after the above checks the fault still occurs,
get in touch with the nearest After Sales
Service.
Please give:
the nature of the problem.
the exact type and model.
the service number (number after the word
Service on the rating plate), located on the right
hand edge of the oven cavity (visible when the

DECLARATION OF CONFORMITY CE

These appliances are designed to come into
contact with foodstuffs and they are constructed
in compliance with Directive 89/109/EEC.
The appliances are designed solely for use as a
domestic cooking appliances. Any other use of
the appliances (e.g. for room heating) is
considered as improper use and potentially
dangerous.
These appliances are designed, built and sold
in compliance with:
- the safety requirements of "Low Voltage"
Directive 73/23/EEC;
- the protection requirements of EMC Directive
89/336/EEC;
- the requirements of Directive 93/68/EEC.

TROUBLESHOOTING GUIDE

AFTER SALES SERVICE

If any repairs are required, please contact an
authorised After Sales Service as indicated in the
warranty.
In the unlikely event that an operation or repair is
carried out by an unauthorised technician, always
request a certification of the job carried out and
insist on the use of original spare parts.
Failure to comply with these instructions may
compromise the safety and quality of the
product.
If the electronic display shows the message
"STOP", press the button 2 to reset the oven
and then set the clock (see the Programmer
Description Sheet supplied separately).
If the electronic display shows the message
"Fxx", contact the After Sales Service, quoting
the error code displayed.
oven door is open). The service number is also
indicated on the guarantee booklet.
Your complete address (including postal code)
and phone number.
11

Advertisement

Table of Contents
loading

Table of Contents