Troubleshooting - Whirlpool W6 OM4 4S1 H BSS Daily Reference Manual

TROUBLESHOOTING

PROBLEM
The oven is not working.
The display shows the letter "F" followed
by a number or letter.
The oven does not heat up.
The function does not start.
The light switches off.
The door will not close properly.
PRODUCT FICHE
The product fiche with energy data of this
WWW
appliance can be downloaded from Whirlpool website
docs . whirlpool . eu
HOW TO OBTAIN THE USE AND CARE GUIDE
> Download the Use and Care Guide
WWW
from our website docs . whirlpool . eu
(you can use this QR Code), specifying the
product's commercial code.
> Alternatively, contact our Client After-sales Service.
12
POSSIBLE CAUSE
Power cut.
Disconnection from the mains.
Oven failure.
"DEMO" mode is running.
"ECO" mode is "On".
The safety catches are in the
wrong position.
SOLUTION
Check for the presence of mains electrical power and
whether the oven is connected to the electricity supply.
Turn off the oven and restart it to see if the fault persists.
Contact you nearest Client After-sales Service Centre and
state the number following the letter "F".
Access "DEMO" from "SETTINGS" and select "Off".
Access "ECO" from "SETTINGS" and select "Off".
Make sure that the safety catches are in the correct position
by following the instructions for removing and refitting the
door in the "Cleaning and Maintenance" section.
CONTACTING OUR AFTER-SALES SERVICE
You can find our
contact details in the
warranty manual. When
contacting our Client
After-sales Service,
please state the codes
provided on your
product's identification
plate .
XXXXXXXXXX XXXXXX XXXXXX
Model: xxxXXXXxx
XXXXXXXXXX
XXXXXXXXXX
XXXXXXXXXX
XXXXXX
XXX X X X X X XXX XX XXXX X X X
XXXXX XXXXXXX