J - Safety Instructions - Extel Code Connect Installation And User Manual

warranty is void if parts have been dismantled.
Clean the outside with a soft dry cloth only. Before
cleaning, disconnect the equipment or switch it
off at the mains.
• The receipt or invoice is proof of purchase date.
IMPORTANT!
• Please read the user manual carefully before
installing or using this product.
• If you are installing this product for someone else,
remember to leave the manual or a copy of it with
the end user.
Warning
• The various items should be dismantled by an
authorised technician only.
Safety measures
• To operate this system in complete safety, it is
essential that the installers, users, and technicians
follow all of the safety procedures described in this
manual.
• Specific warnings and warning symbols are given
for items if necessary.
• The product must be set up according to the
standards applicable in the country of installation
(NF15- 100 for France).
• Damage caused by failing to adhere to the
manual nullifies the warranty. We will not accept
liability for damage resulting from non-compliance!
We will not accept liability for any harm to goods
or people caused by improper handling or failure
to adhere to safety instructions.
This product was manufactured in total compliance
with safety guidelines. In order to maintain this
status and provide for the best possible conditions
of use, the user must adhere to the safety
instructions and warnings in this manual.
This symbol indicates a risk of electrical shock
or short-circuiting.
- Only use this product with electrical current in the
following ranges: 100-240 Volts and 50-60 Hertz.
Never attempt to use this device at a different
voltage.
- Ensure that all the system's electrical connections
EXTEL - CODE CONNECT - 720320
en
conform to the instructions for use.
- In commercial establishments, be sure to adhere to
accident prevention rules for electrical installations.
- For schools, training equipment, workshops, etc.,
the presence of qualified personnel is needed to
monitor operation of the electronic devices.
- Adhere to the usage instructions for other devices
connected to the system.
- Contact a person with experience if you are unsure
about how to operate the system or about the
safety of devices.
- Never plug in or unplug electrical devices with wet
hands.
- When installing this product, verify that the power
wires are not at risk of being damaged.
- Never replace damaged electrical cables yourself! In
this case, remove them and call an expert.
Warning
This symbol means that devices no
longer in use should not be disposed of
with household waste. They are likely to
contain hazardous substances that are
dangerous
environment. Return the equipment to
your local distributor or use the recycling collection
service provided by your local council.
Pour en savoir plus :
www.quefairedemesdechets.fr
Avidsen, undersigned, states that radio equipment such
as the Extel Code Connect is compliant with directive
2014/53/EU
Standards:

J - SAFETY INSTRUCTIONS

to health and the