insys icom INSYS Modem 56k small INT 1.1 USB Manual page 69

INSYS Modem 56k small INT 1.1 USB
Command Description
AT*C
Remote configuration password
This password secures the remote configuration as well as incoming data connec-
tions (see AT*P) and security callback.
OLD PASSWORD
NEW PASSWORD
CONFIRM
OK
AT&C<n>
DCD (CT109) behavior
Behavior of the RS232 DCD output of the INSYS Modem 56k small INT 1.1 USB.
AT&C0
AT&C1
AT+CMGF=<n> Set the SMS dispatch format with AT+CMGS
AT+CMGF=0
AT+CMGF=1
AT+CMGS=<n> SMS dispatch directly via AT command
Depending on the setting of AT+CMFG=<n>, the command AT+CMGS=<n> will have a
different syntax.
Setting AT+CMGF=1 (text mode):
AT+CMGS=<phonenumber>
The INSYS Modem 56k small INT 1.1 USB returns the ">" character and awaits the
SMS text (up to 160 characters), ending with an EOF character (0x1A or STRG-Z).
Notes:
Setting AT+CMGF=0 (PDU mode):
AT+CMGS=<PDU string length>
The INSYS Modem 56k small INT 1.1 USB returns the character ">" and awaits the
PDU string, ended with an EOF character (0x1A or STGR-Z).
Notes:
Requires the old password (default: QWERTY). Wrong input leads
to ERROR.
Enter the new password with 6 to 12 characters.
Repeat the new password. Wrong input leads to ERROR.
The password is immediately stored in the EEPROM.
DCD is always ON
DCD follows the carrier signal of the phone line (default)
Sets the PDU mode for the SMS dispatch via AT+CMGS (default).
Sets the text mode for the SMS dispatch via AT+CMGS.
➢ Depending on the provider, the phone number must be entered in the format
"0941xxxx" or "49941xxxx" (see AT*M and/or AT&Z2).
➢
After the sending procedure was successful, the INSYS Modem 56k small
INT 1.1 USB will return "+CMGS: 000".
➢ Depending on the provider, the phone number must be entered in the format
"0941xxxx" or "49941xxxx" (see AT*M and/or AT&Z2).
➢ "Numbering Plan" is ignored.
➢ The service center is defined by AT&Z0, the SCA field in the PDU string is ig-
nored.
➢ Message header, confirmation SMS and validity period are not supported.
➢
Data coding scheme: Only the "default alphabet" is supported.
➢
After the sending procedure was successful, the INSYS Modem 56k small
INT 1.1 USB will return "+CMGS: <MR>" where <MR> is the message refer-
ence defined in the PDU string.
AT Command Reference
69