Table of Contents
Advertisement
Instructions for the user
On pizza models only, to clean the bottom of the oven, the following operations
have to be carried out first:
Remove the cover then the base on which it
is resting. The base must be lifted a few
millimetres, then pulled outwards.
Lift up the edge of the lower heating
element a few centimetres and clean the
bottom.
Put the pizza plate support back in place,
pushing it in until it hits the back of the
oven, and push it down so that the heating
element plate is embedded into the base
itself.
When the operation is complete, damp parts should be dried thoroughly.
60
Advertisement
Table of Contents
