Page 1
User Manual Ground source heat pump NIBE S1156PC/S1256PC UHB EN 2305-1 631167...
Page 2
When there is new software to download, you can do it here (provided that S1156PC: This function page is only visible in installations with a S1156PC/S1256PC is connected to myUplink). water heater.
3 Control - Introduction Display unit Navigation Menu types Menu system 4 myUplink Specification Connection Range of services 5 Maintenance of S1156PC/S1256PC Regular checks Saving tips 6 Disturbances in comfort Info-menu Manage alarm Troubleshooting Add. heat only Item register Contact information...
Signed __________________________________________ Serial number The serial number can be found at the bottom right on S1156PC/S1256PC, in the display on the home screen "Product overview" and on the type plate. Caution You need the product's (14 digit) serial number for servicing and support.
There the brine cools the heating sys- The temperatures are only examples and may vary between tem's water so that comfort cooling can be maintained different installations and time of year. during the hotter periods of the year. NIBE S1156PC/S1256PC Chapter 2 | Heat pump function...
For hard switch off: press and hold the on/off button for 5 seconds. To activate emergency mode when S1156PC/S1256PC is switched off: press and hold the on/off button for 5 seconds. THE STATUS LAMP (Deactivate the emergency mode by pressing once.) The status lamp shows how well your system is operating.
Navigation FACTORY SETTING Factory set values are marked with *. S1156PC/S1256PC has a touchscreen where you simply Your installer may have chosen other values that suit your navigate by pressing and dragging with your finger. system better. SELECT Most options and functions are activated by lightly pressing on the display with your finger.
Page 8
When there is new software to download, you can do it here (provided that S1156PC/S1256PC is connected to myUplink). Press the icons on the menu’s lower edge for more informa- tion about each function.
(accessory is required). 13.45 3 October Menu 2 – Hot water You make settings for hot water operation here. S1156PC: This menu is only visible in installations with water Your system is working properly. Do you want help heaters. making changes? Menu 3 - Info Yes please, take me to Smartguide.
Installer Manual. Specification You need the following in order for myUplink to be able to communicate with your S1156PC/S1256PC: • wireless network or network cable •...
S1156PC/S1256PC work- tem. The pressure may vary slightly due to the ing at a higher temperature. This in turn can lead to in- temperature of the fluid.
HOT WATER 13.45 3 October In the event of an S1156PC: This part of the fault-tracing chapter only applies alarm, a malfunction if a water heater is installed in the system. Your system has an active alarm. has occurred and the Please select action or contact your installer.
You can activate the emergency mode both when In event of repeated filling, contact the installer. S1156PC/S1256PC is running and when it is switched off. To switch off, restart or activate emergency mode: press and hold the on/off button for 2 seconds. This brings up a menu with various options.
Tel: +48 (0)85 66 28 490 Hannabadsvägen 5, 285 21 Markaryd Tel. +41 (0)58 252 21 00 biawar.com.pl Tel: +46 (0)433-27 30 00 info@nibe.ch info@nibe.se nibe.ch nibe.se For countries not mentioned in this list, contact NIBE Sweden or check nibe.eu for more information.
Page 16
WS release date: 2023-02-13 06:13 Publish date: 2023-02-13 13:57 This is a publication from NIBE Energy Systems. All product illustrations, facts and data are based on the available information at the time of the publication’s approval. NIBE Energy Systems makes reservations for any factual or printing errors in this publication.