Smeg SC106-8 Manual page 49

Instructions for the user
Two minutes after the start of the cleaning cycle
(Pyrolysis), a locking device which prevents opening
of the door will be tripped.
indicate that the locking device has been activated.
At the end of the cleaning cycle, the locking device
will remain active until the temperature inside the
oven has reached a safety threshold. When the oven
has cooled down, collect the residues from
automatic cleaning with a damp microfibre cloth.
To select a cleaning cycle with delayed start,
after setting the duration press the temperature
selection knob once.
appear on the display.
Turn the knob right or left to increase or decrease
the time when you want to start the cleaning cycle.
A few seconds after the required duration is set,
and will stay lit, and the oven will wait for the
starting time set for the cleaning cycle.
It is not possible to select any functions once the door locking device has been
activated. Wait for
will light up to
and the current time will
to go out.
(Temperature knob)
(Temperature knob)
113