Do you have a question about the PL8210X and is the answer not in the manual?
Questions and answers
Renie Spreadbury
March 31, 2025
My dishwasher starts and makes all the usual running noises. After a few minutes it just stops. Tried turning off and on and restarting multiple times. Keeps happening.
1 comments:
Mr. Anderson
March 31, 2025
If the Smeg PL8210X dishwasher starts but stops after a few minutes, possible issues include:
- Water intake malfunction: Check that the water connections are correct, the intake tap is turned on, and the filter is not blocked. - Water pump-out malfunction: Check that the drain hose is not kinked or crushed and that the siphon and filter are clear. - Turbine flow-regulator malfunction: The appliance may not measure water correctly. Interrupt the program, switch off the dishwasher, then restart and reprogram it.
If the problem persists, contact after-sales service.
Need help?
Do you have a question about the PL8210X and is the answer not in the manual?
Questions and answers
My dishwasher starts and makes all the usual running noises. After a few minutes it just stops. Tried turning off and on and restarting multiple times. Keeps happening.
If the Smeg PL8210X dishwasher starts but stops after a few minutes, possible issues include:
- Water intake malfunction: Check that the water connections are correct, the intake tap is turned on, and the filter is not blocked.
- Water pump-out malfunction: Check that the drain hose is not kinked or crushed and that the siphon and filter are clear.
- Turbine flow-regulator malfunction: The appliance may not measure water correctly. Interrupt the program, switch off the dishwasher, then restart and reprogram it.
If the problem persists, contact after-sales service.
This answer is automatically generated