Polarity Switch Removal And Replacement - Lincoln Electric SQUARE WAVE TIG 175 Service Manual

F-45

POLARITY SWITCH REMOVAL AND REPLACEMENT

Service and repair should be performed only by Lincoln Electric factory trained per-
sonnel. Unauthorized repairs performed on this equipment could result in danger to
the technician or the machine operator and will invalidate your factory warranty. For
your safety and to avoid electrical shock, please observe all safety notes and precau-
tions detailed throughout this manual.
If for any reason you do not understand the test procedures or are unable to perform
the tests/repairs safely, contact the Lincoln Electric service department for technical
troubleshooting assistance before you proceed.
Call (216) 383-2531 or 1-888-935-3877.
_____________________________________________________________
DESCRIPTION
This procedure will aid the technician in the removal and replacement of the polarity switch.
MATERIALS NEEDED
3/8" Nutdriver
1/2" Wrench
7/16" Wrench
Phillips head screwdriver
5/64" Allen type Wrench
Needle nose pliers
Slot head screwdriver (2 required)
Wiring diagram
TROUBLESHOOTING & REPAIR
WARNING
SQUARE WAVE TIG 175
F-45