Rvs Brake Arm Assembly; Reel Table (T) Assembly (Fig. 3-14) - Sony SLV-360 Service Manual

3-12. RVS BRAKE ARM ASSEMBLY, REEL
TABLE (T) ASSEMBLY (Fig. 3-14)
1) Remove main brake T assembly. (Refer to 3-10.)
2) Remove soft brake T assembly. (Refer to 3-11.)
3) Remove tension coil spring @ in the order @ to ©.
4) Remove RVS brake arm assembly @).
5) Remove stopper washer (2) © to pull out reel table (T)
assembly @.
[Note on Mounting]
« Apply one drop of Diamond Oil NT-68 (Jig Ref. No. J-13) to
zr marked portion before mounting reel table (T) assembly @.
(Fig. A)
+ Don't touch the hatched portion on reel table (T) assembly ©
and brake shoe @ of RVS brake arm assembly @ with bare
hand.
@ Tension coil spring (RVS brake)
@ RVS brake arm assembly
@ Stopper washer (2)
@ Reel table (T) assembly
@ Brake shoe
Fig. 3-14
99 =.