Rotary Encoder Switch (Fig. 3-19) - Sony SLV-360 Service Manual

3-17. ROTARY ENCODER SWITCH (Fig. 3-19) [Note on Mounting]
1) Remove timing belt. (Refer to 3-3.) + Apply FLOIL SG-055G (Jig Ref. No. J-12) to ¥ marked
2) Remove CAP brake assembly. (Refer to 3-4.) portions. (Fig. 3-19, A)
3) Remove cam motor chassis block assembly (Refer to 3-15.) * Adjust the hole @ to the hole on cam motor chassis. (Fig. B)
and turn upside on the bottom.
+ Adjust the holes @ and @ to the hole on cam motor chassis.
4) Remove stopper washer (2) @ to pull out worm wheel @). (Fig. C)
5) Remove stopper washer (2) @ to pull out cam gear @.
6) Pull out FL driving gear © and rotary encoder switch ©.
@ Cam gear
@ Stopper washer (2)
@ Cam gear v w
<, ty: Each 1 drop
Fig. A
© Rotary encoder
@ switch
© Rotary encoder
switch chassis
Cam motor chassis
Each ¥ 1/2 drop
x1 drop to inside
Fig. 3-19
as ig oe
a a S O ao Pee RAT Ses Foe ee M A E ee E R e S e e C