3-9.
CAPSTAN
MOTOR (Fig. 3-11)
1)
Remove timing belt. (Refer to 3-3.)
2)
Remove CAP brake assembly. (Refer to 3-4.)
3)
Remove screws @ to pull out capstan motor @).
[Note on Mounting]
+ Keep clean the surface contacts tape of capstan motor @).
* On tightening screws (), first tighten screw A temporarily, next
tighten screws in the order B to C to A.
[Adjustment after Mounting]
« 4-1. Tape path adjustment.
@ Screws (2.6)
@ Capstan motor
Fig. 3-11