Troubleshooting - Smeg PL614WH Instruction Manual

6. Troubleshooting

In case of a malfunction, the dishwasher will identify the program by switching on a combination of
lights.
When an alrm is present, all the PROGRAM lights
(7) come on, while the PROGRAM PHASES lights
(10) identify the error code:
CODE PHASES LIGHTS
E1
E2
E3
E4
E5
E6
E7
E8
E9
User instructions
The anti-flooding system (if installed) has been tripped.
The system which limits the water level inside the dishwasher (safety
unit) has been tripped.
The appliance is not able to pump out the water.
Temperature sensor disconnected.
The appliance is not able to take in water.
The appliance is not able to pump out the water from the tank.
The appliance is not able to measure the amount of water loaded
accurately (on models with turbine flow-regulator only).
Anomaly in the system which distributes water to the basket (where
installed).
The maximum level of water for loading has been exceeded (on
models with turbine flow-regulator only).
DESCRIPTION
25