Table of Contents
Advertisement
User instructions
HALF LOAD WASH FUNCTION
(available in all programs except the soak program)
This function is recommended for loads of up to 7 place-settings, and
cuts down on the use of water and electricity.
By pressing the ½ LOAD WASH (4) button it is possible to select only
one basket washing (upper or lower).
After having the program selected, continue as follows:
•
by pressing for one time the ½ LOAD
WASH (4) button, it will select the upper
basket and on the display will compare the
following visualization;
•
by pressing the ½ LOAD WASH (4) button
again the lower basket is selected;
•
by pressing a third time the ½ LOAD WASH (4) button it will bring
back to the full load washing mode.
N.B.: by selecting the ½ LOAD mode, a modification in the indication of
the program duration will set.
One half of the cutlery basket can be placed in the ½ LOAD program
basket.
WARNING: do not load dishes and cutlery into the non-selected
basket, because the water spray will only reach the selected basket.
15
Advertisement
Table of Contents
