Using The Hob - Smeg P755AB1 Manual

5. USING THE HOB

Make sure that the fastening rings, the burners, the crowns
flame spreader and the racks are assembled correctly.
Pins A of the flame-spreader crowns must be inserted into
the housings B of the burner. The 2 burner holes are
inserted in the igniter and thermocouple on the hob.
5.1 Positioning the racks
The racks are provided separate unassembled on the hob. To position each rack correctly
on its burner, follow the instructions below:
Each rack must be positioned on the corresponding burner in order to guarantee proper
operation. Be very careful to match the different central diameters of the racks to the
flame-spreader crowns.
At the ends of the legs of the racks there are
silicone rests with a hole that must be centred
onto the matching fixing pins on the hob.
32
Instructions for the user
To position the rack, you first need to centre the
fastening pins (1) and (2) and then lower it until
it is resting on the hob.
When properly positioned, the legs of the racks
must not be suspended above the hob but
should rest on top of it.