Advertisement
Computer Setup
Windows
The first time you plug the XPD2 into a USB port, Windows
1.
will install the USB driver for that port.
To set the XPD2 as your default input/recording device, or
2.
to change its settings, open the Control Panel, Hardware &
Sound settings, then click SOUND. Under Recording tab,
select the "Samson RXD Wireless Receiver" from the list
of devices and press the Set Default button to set it as the
default audio input device.
To set the gain of the microphone, click the Properties
3.
button, and then select the Levels tab. Slide the control
until the desired level is reached.
Apple macOS
Plug the RXD2 receiver into an available USB port.
1.
Select the XPD2 as the computer's audio input, open System Preferences from the dock or the
2.
main Apple Menu.
Next, open the Sound preferences, choose the Input tab and select "Samson RXD Wireless
3.
Receiver". To set the gain of the microphone, adjust the Input volume slider at the bottom of
the Sound dialog box. The Input Level meter will show the recording level.
AirLine Digital Wireless System
Advertisement
