Web Interface; Password; Configuring The Module - Miele XKM 3200 WL LMD Operating Instructions Manual

Password

Configuring the
module

Web interface

The XKM 3200 WL LMD module has a dedicated web interface via
which the network settings can be configured, printers can be set up
or the password can be changed.
The interface can be accessed from any workstation on your local net-
work. A configured interface in the controller of the cleaning machine,
an up-to-date web browser and an existing network connection to the
cleaning machine are required.
The web interface is divided into websites. The output language is
English.
Enter one of the following addresses in the address bar of your

browser (where <IP-address> corresponds to the IP address of your
cleaning machine).
https://<IP-address>/password.html
When the web interface is opened for the first time, the "Admin" user
must set up a password for their profile (once only). A module reset
will reset the module settings to the factory default settings; this will
include resetting the password for the "Admin" user.
- Change Password
Changing the module password
The "Admin" user and the password must always be set at the fact-
ory as a first step before further settings can be made. When set-
ting the password for the first time, the field for the old password
must be left blank.
https://<IP-address>/index.html
To change the settings, you must enter a user name and a password.
You cannot access the settings without doing this.
- WiFi Settings
Selecting a WiFi network
- IP Configuration
Modifying the interface configuration
- Network Printer
Specifying a network printer for printing reports
- Reset
Restart the module or restore the factory default settings (this will
also delete user profiles and module passwords).
en - Network connection
59