Smeg LEV-141XV How To Use

ENGLISH

Technical information

Electrical connection

How to use your rising
cabinet
Electric supply...................................220 V – 50/60 Hz
Max. absorption........ ..........................1750 W (7,9 A)
Be sure that voltage and dimensions of the wires meet voltage
and power indicated on the markings located on the back of
the appliance. This appliance must be earthed. For this reason
the plug connected with the cord and the socket which the
appliance is connected with must be of the same type
(complying to EEC standards).Before connecting check the
efficiency of the earthling equipment.
Our company declines any responsibility for damages due to
Missing or defective earthling or bad earthling equipment.
By the thermostat knob different temperatures (up to 80° C ) can
be selected. The table shows the temperatures corresponding to
the different position of the knob.
*(Values are subject to change by external temperature)
Knob position 1
0
Min
Med
Max
The orange light is on till the selected temperature is reached.
After a while it will be on again, signalling that the heating
element is working again to maintain the desired temperature.
To switch the rising cabinet off, turn the knob anti clockwise to
reach position " 0 ".To raise the humidity degree inside the
rising cabinet, fill the tray located on the base of the appliance
with water in order to maintain it constantly wet.
Temperatura °C (
indicative
-
25-35
35-65
65-85
)