Special Functions - Smeg LB86-1 Instructions For Use Manual

Interruptions

Special functions

Special functions
14
• Pull the power lead from the socket and cut the power supply
from the mains.
• By the user
Selecting PUMP STOP function
Program is stopped when it comes to the PUMP STOP stage
(drum door remains closed all the time). Indicator LED above
the knob (E) starts fl ashing. Washing procedure is continued by
pressing the START knob (F).
Own (physical) interruption
You may stop the program by turning the program selector to the
position "0". If there is water in the drum select one of additional
programs (pumping
terminate the program.
PAUSE knob
By pressing the PAUSE knob (F) program may be suspended
at any time. After certain time you may open the door if there is
no water in the drum, otherwise this is not possible. Program is
continued by pressing the START knob (F).
• Failures
Program is suspended in case a failure occurs. Signal LED's
are fl ashing and sound signal is heard (see cf. Failures).
• Power failure
At electric cutout the program is interrupted, however, after the
power supply has been re-established, the program operation
automatically proceeds.
If a power failure occurs when the drum is still full of
water, be careful not to open the door before you pump
the water out.
• Child lock
- It is switched on by simultaneously pressing the elevated
water level knob
knob (C) for at least 3 seconds. Selection is confi rmed by
the sound signal and illuminated signal LED. The function is
switched off following the same procedure.
- As long as the Child lock function is engaged you may not
alter the program or additional functions. You may merely
switch off the machine by turning the program selector (A)
to the position "0". Child lock remains active even after the
appliance is switched off, and you have to disengage it if
you want to select a new washing program.
, spinning ) to empty the water and
(D) and half-load /short program