Wi-Fi connection
Setting up the Wi-Fi connection for the first time
1
Download and install the Philips Air+ app from the App Store or
Google Play�
2
Put the plug of the Air Performer in the power socket and touch
to turn on the Air Performer.
» The Wi-Fi indicator
3
Make sure that your smartphone or tablet is successfully connected to your
Wi-Fi network.
4
Launch the Philips Air+ app and click on "Connect a New Device" or press
the "+" button at the top of the screen. Follow the onscreen instructions to
connect the Air Performer to your network.
Note:
These instructions are only valid when the Air Performer is being set up for the first time. If the
•
network has changed or the setup needs to be performed again, see Chapter "Reset the Wi-Fi
connection" on page 8�
If you want to connect more than one Air Performer to your smartphone or tablet, you have to
•
do it one by one�
Make sure that the distance between your smartphone or tablet and the Air Performer is less
•
than 10 m without any obstructions�
Reset the Wi-Fi connection
Note:
Reset the Wi-Fi connection when your default network has changed.
•
1
Put the plug of the Air Performer in the power socket and press the
to turn on the Air Performer.
2
Long press
again, the Wi-Fi indicator
» The Air Performer enters pairing mode.
3
Follow the steps 3-4 in "Setting up the Wi-Fi connection for the first time"
section.
EN
8
blinks orange for the first time.
on the appliance for 7 seconds until it powers off and powers on
blinks orange.
button